Protect your 1998 Ford Ranger seats from daily abuse and stains. That worn-out cloth is holding onto years of dirt, coffee spills, and dog hair. The best 1998 ford ranger seat covers can change all that. They give your truck’s interior a fresh look without breaking the bank. Plus, they are easy to install yourself—no special tools needed.
You deserve a cab that feels clean and inviting. These covers shield against fading from the sun and wear from getting in and out. Your Ranger will feel newer, and you will enjoy every drive a little more. It’s a simple upgrade with big payoff. Go ahead, give your old seats a second chance with covers that actually fit.
Product Comparison Table: 9 Best 1998 Ford Ranger Seat Covers
| Image | Why We Like This Product | Editor’s Rating | |
 |
EDIETH 2Pcs Front 60/40 Cloth High Back Bench Seat…
|
9.5 |
Read Review |
 |
EDIETH Black Oxford Fabric 60/40 Split Seat Covers for…
|
9.3 |
Read Review |
 |
Jecoupoon Front Driver Passenger Side Seat Covers for 60/40…
|
9.2 |
Read Review |
 |
ESMING 2Pcs 60/40 Cloth High Back Bench Seat Cover…
|
9.0 |
Read Review |
 |
ESMING 60/40 Split Bench Highback Seats Oxford Fabric Seat…
|
8.8 |
Read Review |
 |
runfider 2Pcs 60/40 Cloth High Back Bench Seat Cover…
|
8.6 |
Read Review |
 |
runfider 2Pcs 60/40 Cloth High Back Bench Seat Cover…
|
8.4 |
Read Review |
 |
NLQR 60/40 High Back Bench Seat Cover fit for…
|
8.3 |
Read Review |
 |
SAPUBK Custom-Fit Front Seat Covers Without Console Replace for…
|
8.1 |
Read Review |
Quick Review For Top 9 1998 Ford Ranger Seat Covers
EDIETH 2Pcs Front 60/40 Cloth High Back Bench Seat Cover Compatible with Ford Ranger XLT 1998 1999 2000 2001 2002 2003-Without Console Cover-Gray
The Edieth 2Pcs Front 60/40 Cloth High Back Bench Seat Cover is made for the Ford Ranger XLT, model years 1998 through 2012. It is designed specifically for the front 60/40 split bench seats, not bucket seats or the rear bench. The fit follows the original OEM seat shape pretty closely, with cutouts for headrests and seatbelts. Before you buy, it is a good idea to check your truck’s seat layout against the product images to make sure it matches.
The covers come without a console cover, so keep that in mind.
These seat covers are built for people who actually use their truck. If you work construction, take your dog everywhere, or haul gear that leaves dirt and scratches, this cover helps protect your factory upholstery. It helps your truck hold its value better by keeping stains and wear off the original seats.
The 60/40 split design is handy because you can fold down one side for storage or access while the other side stays fully covered. The cloth material is comfortable and not too flashy, just a simple gray that blends with the interior.
Installation is straight forward and takes about 15 minutes. The covers come vacuum-packed, so when you first open them, they might look wrinkled. Give them an hour or two to relax, or park the truck in direct sunlight to help the material conform better.
EDIETH Black Oxford Fabric 60/40 Split Seat Covers for Ford Ranger 1998 1999 2000 2001 2002 2003 – Highback Bench Design Durable Water-Resistant Protectors with Non-Slip Backing
The EDIETH Black Oxford Fabric 60/40 Split Seat Covers for Ford Ranger 1998 1999 2000 2001 2002 2003 are built for a very specific job. They are made for the highback bench seats in your Ford Ranger from those years. The 60/40 split design is key, because it lets you keep full access to your storage compartments and seatbelts without any fuss. Elastic edges and reinforced stitching work together to give you a secure fit that won’t slide around or mess with the seat functions.
If your factory upholstery is looking tired or you just want some extra protection, these covers are a straightfoward solution.
The material here is 600D Oxford fabric. It is heavy-duty and resistent to spills, stains, and the daily wear from pets or work gear. A water-resistant coating on the surface makes cleanup simple, but the fabric stays breathable so you don’t get that sweaty feeling on long drives. It also handles extreme temperatures without cracking or becoming brittle.
So whether you are hauling tools or taking the dog for a ride, these covers are ready.
Installation is suprisingly quick. You do not need any tools. Just stretch the covers over your seats and secure them with the hidden hooks. The non-slip backing keeps everything in place, even when you are bouncing down a rough road. Most people get the job done in about ten minutes.
Jecoupoon Front Driver Passenger Side Seat Covers for 60/40 Seats Compatible with Ranger 1998 1999 2000 2001 2002 2003 Cotton blk-Charcoal Seat Cover
The Jecoupoon Front Driver Passenger Side Seat Covers for 60/40 Seats are a direct replacement option for the 1998 to 2003 Ford Ranger. These covers are specifically designed for the front high-back 60/40 split bench seats. If you own a Ranger from those years, this set is made to fit your truck’s exact seat dimensions.
The material is a cotton blend mixed with polyester. This hand-picked face fabric feels soft to the touch but is built to last.
There is added padding sewn into the cover. This padding creates extra comfort for your daily drives around town. The backing material helps the cover stay in place once installed. You will apprecate the firmer support and the slight cushioning it gives compared to worn-out factory fabric.
These seat covers are great for refreshing your interior style. The black-charcoal color matches many factory interiors from that era. They look clean and understated.
More importantly, they help protect your original seats from future wear. Spills, stains, scratches, and pet fur are no match for this cotton blend surface. If you carry tools, groceries, or dogs in your cab, this cover will keep the foam and fabric underneath looking newer for longer.
Installation is different from a slip-on or pullover cover. These are designed as replacements. That means you remove your old factory seat cover and put this one on in its place.
ESMING 2Pcs 60/40 Cloth High Back Bench Seat Cover for Ford Ranger XLT 1998 1999 2000 2001 2002 2003-Without Console Cover-Dark Black
The ESMING 2Pcs 60/40 Cloth High Back Bench Seat Cover for Ford Ranger XLT 1998 1999 2000 2001 2002 2003-Without Console Cover-Dark Black is a practical add-on for your truck. If you own a Ford Ranger from those years, this set is built to fit the split bench layout. It covers the 60 and 40 sections seperately, leaving out the center console area. That means its designed for trucks without a console, so you get a clean, direct cover for the main seating. Fitment is the most important thing here.
These covers are made for the 1998 through 2003 Ford Ranger XLT models. But you need to check your specific seat type and model year before buying. The product images show the exact seat shapes they work with. If your truck has a different seat style or a console, these might not fit right. Always compare your interior to what is shown to avoid a mismatch. This careful checking saves you time later. Installation is meant to be straighforward.
The package includes instructions and some helpful tips to guide you. You wont need special tools or proffesional help. The covers follow the original seat contours, so you can slip them on and pull them tight using common methods. Just take your time to smooth out the cloth for a snug look. It is a job you can handle in an afternoon without much fuss. The material is a 60/40 cloth blend. It is breathable, which helps keep you cooler on warm days. It also adds a bit of comfort to the ride.
ESMING 60/40 Split Bench Highback Seats Oxford Fabric Seat Covers for Ford Ranger 1998 1999 2000 2001 2002 2003 Durable Water-Resistant and Easy to Clean-Black
The ESMING 60/40 Split Bench Highback Seats Oxford Fabric Seat Covers for Ford Ranger 1998 1999 2000 2001 2002 2003 Durable Water-Resistant and Easy to Clean-Black are built to handle whatever you throw at them. These covers are made with a premium Oxford fabric, which is tough and water-resistant. That means they hold up well against spills, stains, and general wear from daily use or muddy adventures.
The material is designed to keep your original seats looking fresh, whether you are driving on rough trails or just commuting to work.
These seat covers are a custom fit for the Ford Ranger models from 1998 through 2003. They are specifically shaped for the 60/40 split bench highback seats found in those trucks. So if your seats are worn out or you just want extra protection, this set is made to match your vehicle’s exact layout.
Just double-check your seat configuration before ordering to make sure it lines up. The fit is snug, and it wont mess with how your seats normally function.
Getting them installed is pretty straightfoward. They come with elastic edges and a simple design that lets you put them on in under ten minutes, even if you are not a car expert. A step-by-step guide is included, so you can follow along without any hassle.
runfider 2Pcs 60/40 Cloth High Back Bench Seat Cover Fit for Ford Ranger XLT Front 1998 1999 2000 2001 2002 2003 Without Console Cover Black
The runfider 2Pcs 60/40 Cloth High Back Bench Seat Cover in Black is made for the Ford Ranger XLT Front seats from 1998 through 2003. It fits the 60/40 split bench configuration and is designed without a center console cover. This is a protective cover, not a replacement upholstery kit. It goes right over your existing seats.
Before you buy, take a moment to check your vehicle year and model. The product details page has specific instructions to help you confirm fitment.
This step saves you time and makes sure you get the right part for your truck. If you have any questions about installation, customer service can help you out.
When your order arrives, the cover will be in compressed packaging. That means it will have some folds and creases from being packed tight. Dont worry about this. Once you fully unpack it and let it sit for about 10 minutes, the material will relax and return to its normal shape.
The cloth is a 60/40 blend, which feels durable and practical for daily use.
Installation is straightforward. You simply slip the cover over your seat. The bottom has an elastic band that holds it in place. There are no complicated straps or hooks. This design makes it easy to put on and take off. When the cover gets dirty, you can remove it and clean it without any hassle. Just toss it in the wash or spot clean as needed.
This product comes with a 2-year warranty.
runfider 2Pcs 60/40 Cloth High Back Bench Seat Cover Fit for Ford Ranger XLT Front 1998 1999 2000 2001 2002 2003 Without Console Cover Gray
The runfider 2Pcs 60/40 Cloth High Back Bench Seat Cover for Ford Ranger XLT Front 1998 to 2003 is a practical protective cover designed to keep your trucks original seats in good shape. It fits the split bench configuration from those model years, specifically for the front row and without the center console cover. One of the most important things to get right is fitment. This set works with Ford Ranger XLT models from 1998, 1999, 2000, 2001, 2002, and 2003.
Before you buy, take a moment to confirm your vehicle’s year and model matches this listing. Checking this upfront will save you time and help you get the cover installed faster. If you run into any issues during installation, the product details page includes step-by-step instructions. And if those dont help, you can reach out to customer service for direct assistance. The seat covers are made from a 60/40 cloth blend.
This material provides a decent balance of comfort and durabilty for daily use. When the product arrives, you will notice it comes in compressed packaging. This is normal. After you fully unpack the cover, give it about 10 minutes. The folds and creases will naturally relax and return to their regular shape. You don’t need to steam or iron them. Installation is straightforward. This is a protective cover, not a full reupholstery job. You simply slip it over your existing seat.
NLQR 60/40 High Back Bench Seat Cover fit for Ford Ranger Pickup XLT 1998-2003 Without Console Cover 2Pcs Universal Fit Seat Covers Black
The NLQR 60/40 High Back Bench Seat Cover fit for Ford Ranger Pickup XLT 1998-2003 Without Console Cover 2Pcs Universal Fit Seat Covers Black is designed specifically for your truck. If you own a Ford Ranger from 1998 to 2003 with a 60/40 split high back bench seat and no center console, this set of two covers is made to match. The fit is precise because it is tailored for that exact seat configuration. You won’t have to fight with loose fabric or awkward bunching.
These covers slip right over the seats and headrests, so installation is straight forward. Just slide them on, adjust a bit, and you are done. No complicated tools or professional help needed.
The material used here is built to last. It is made from high-quality components that resist wear and tear over time. Your original seat upholstery gets solid protection from spills, dirt, and daily use. The black color is classic and understated, blending nicely with most interior trims.
There is a red accent that adds a subtle touch of style without being too flashy. The fabric itself is comfortable to sit on, even during longer drives. It does not get sticky or uncomfortable in warm weather, and it provides a nice balance of support and cushioning.
You get two pieces in this set, one for the driver side and one for the passenger side. They are universal in the sense that they fit the specific 60/40 bench design of your Ford Ranger from those years.
SAPUBK Custom-Fit Front Seat Covers Without Console Replace for 1998-2003 Ford Ranger XL Regular Cab 60/40 Split, Knitted Fabric Composite Soft Foam Lining Airmesh Breathable Seat Cover Cushion
The SAPUBK Custom-Fit Front Seat Covers Without Console Replace for 1998-2003 Ford Ranger XL Regular Cab 60/40 Split is a direct replacement for your factory upholstery. If you own a Ford Ranger from 1998 to 2003 with a regular cab and a 60/40 split bench seat, this set is designed to fit without a center console.
It replaces the old, worn fabric and helps protect your seats from dirt, spills, and everyday wear.
These seat covers are made with a high-density knitted fabric on the outside. This material allows air to flow through, which helps keep you cooler on hot days. The inside has a composite soft foam lining that adds a layer of comfort for daily driving. The fabric is breathable, so you won’t feel sticky after a long trip. It also has a two-tone design and reinforced stitching.
This construction is meant to handle extreme weather, pet claws, and general use without falling apart.
Installation is straightforward. The set comes with hooks and elastic bands. You simply remove your old seat cover, place the new one on the correct position, and fasten it with the hooks and bands. The process takes minimal effort and gives you a snug, custom fit. The covers are also cushioned, so they add a bit of padding to your seats.
Keeping them clean is simple.
1998 Ford Ranger Seat Covers Buying Guide
Your 1998 Ford Ranger needs seat covers tough enough for work trucks and daily driving. The cab gets dirty fast, and original seats show wear. But looking for 1998 ford ranger seat covers can feel overwhelming with so many options. Let’s break it down simply so you can find the right fit.
Material Matters: Neoprene vs. Leatherette vs. Canvas
Think about your real use. Do you haul tools or muddy boots? Canvas covers are your best friend—they shrug off dirt and last through abuse. Neoprene is like a wetsuit for your seats. It handles spills and sweat, perfect for hot days or wet gear. Leatherette looks clean and wipes down fast, but it can get sticky in summer. Pick based on what your truck goes through, not just looks.
Fit For Your Cab: Standard vs. Custom
Not all covers fit the same. Your Ranger has a bench seat or buckets, and maybe a jump seat in back. Universal covers are cheap but often sag or bunch up. Custom-fit covers hug every curve, so they stay put during turns. Check if the cover includes headrests and armrests. A loose cover slides around and annoys you every time you get in.
Durability for Daily Grind
Your seats take a beating from sun, dirt, and gear. Look for double-stitched seams and reinforced edges. Some covers have a backing to prevent slipping. If you leave windows down, UV-resistant materials stop fading. A cheap cover might tear in months, so spend a bit more for something that lasts. You don’t want to replace them agian next season.
Easy Install and Clean Up
Nobody wants a wrestling match with straps. Pick covers with simple clips or elastic hooks. Most install in under 10 minutes. For cleaning, machine-washable covers save you hassle. Others just need a wipe with a damp cloth. Think about your time—do you want to scrub or just toss them in the wash?
Frequently Asked Questions About 1998 Ford Ranger Seat Covers
Will seat covers fit my 1998 Ford Ranger’s bench seat?
Yes, most seat covers come in options for bench seats. Just check the product details. You’ll need to know if you have a 60/40 split bench or a solid bench. Measure your seat first to be sure. It’s easy to do with a tape measure.
Can I get covers for the jump seats in the back?
You sure can. Many sets include covers for the rear jump seats. But not all do. Look for a “full set” or “extended cab” option. If your Ranger has a regular cab, you might just need front covers. Always read the listing carefully so you know what’s included.
What material is best for my truck?
That depends on how you use your Ranger. For work, go with heavy-duty neoprene or canvas. They resist dirt and water. For daily driving, polyester or faux leather looks nice and is easy to clean. Avoid cheap vinyl. It can crack in the sun. Your truck is tough, so pick covers that are tough too.
Do I need to remove my factory seat belts to install the covers?
Not usually. Most covers have slits or velcro openings for seat belts. You can install them right over your seats. Just be patient and pull the fabric tight. It might take 20 minutes per seat. A helper makes it go faster. If your belts are bolted to the seat, you might need to undo them. Check your specific cover’s instructions.
How do I clean my seat covers?
It’s simple. Most covers are machine washable. Just remove them and toss them in with cold water. Air dry them to avoid shrinkage. For leather-look covers, wipe them down with a damp cloth. Avoid harsh chemicals. They can damage the fabric. A little soap and water works great.
Will covers protect my seats from dog hair and mud?
Yes, thay will. A good set of covers acts like a shield. They keep your original seats clean and fresh. If you have a dog, look for waterproof or water-resistant covers. They are easier to wipe down. Just shake out the hair or vacuum them. It’s way easier than cleaning the orginal seats.
One Last Look
Your truck works hard every day. Your seats should feel good while you drive. Pick covers that fit tight and stay put. You want something easy to clean after a long week. Look for materials that block sun damage and resist spills. Thick fabric or neoprene works best for daily use. Make sure teh covers let you reach your seat adjustments without trouble. A good fit means no sliding around when you turn corners. Your Ranger handles well and your seats should too.
Getting the right protection now saves you from worn out upholstery later. You just need covers that match your truck’s tough nature. The best 1998 ford ranger seat covers combine durabilty with a clean look. They keep your original seats fresh while making your cab feel better. Pick a set that fits your budget and your driving needs. Your Ranger will thank you every time you get behind the wheel.