Restore your F-150’s lock area with precise grommet covers for a factory finish. You know how those plastic pieces around the door lock get brittle and crack after years of sun and use. That’s exactly why you need quality replacements. These are the exact door lock grommet covers for 1995 ford f150 xlt that fit like the originals, with no slop or rattling. They slide right on over the lock cylinder, giving that clean, OEM look again.
You don’t want your truck looking beat up around the handles, right? These covers protect the metal underneath from extra wear and tear. They’re made from durable nylon composite that holds up to the elements. Installation is a breeze, just pop them on and your door locks will look almost new. You’ll notice the difference immediately, especially if your old ones were faded or missing completly. It’s a simple fix that makes a big visual difference for your classic truck.
Product Comparison Table: 5 Best Door Lock Grommet Covers For 1995 Ford F150 Xlt
| Image | Why We Like This Product | Editor’s Rating | |
 |
Magimaker Door Lock Cylinders with 2 Keys Compatible with…
|
9.8 |
Read Review |
 |
Door Lock Cylinders Set & Ignition Switch with Keys,…
|
9.3 |
Read Review |
 |
2 Sets Door Lock Cylinder with Keys Fit for…
|
8.8 |
Read Review |
 |
Door Lock Knob Grommets Pair For 1962-1967 Ford Fairlane
|
8.2 |
Read Review |
|
Door Lock Knob Grommets Pair For 1968-1972 Ford F-250…
|
7.7 |
Read Review |
Quick Review For Top 5 Door Lock Grommet Covers For 1995 Ford F150 Xlt
Magimaker Door Lock Cylinders with 2 Keys Compatible with Ford F150 F250 F350 Pickup 1992 1993 1994 1995, Plug and Play
The Magimaker Door Lock Cylinders with 2 Keys compatible with Ford F150 F250 F350 Pickup 1992 1993 1994 1995 is a direct replacement part for your truck. If your current door lock is sticking, hard to turn, or the key no longer works smoothly, this cylinder offers a straightforward solution. It is designed specifically for Ford F-Series trucks from 1992 through 1995, including the F150, F250, and F350 models.
This is not a universal part, so you can be confident it will fit your vehicle without modifications.
You get two keys with each cylinder, which is handy if you share the truck or need a spare. The cylinder itself is built to be durable and stable, handling regular use without failing. It is a brand new product, not a refurbished or used part, so you are getting fresh components that meet professional standards for performance.
The materials are chosen to resist wear and corrosion, helping the lock last longer even in tough weather or dusty conditions.
Installation is suprisingly simple. This is a plug and play design, meaning it fits directly into the door handle assembly on your Ford truck. You do not need to modify anything or buy extra adapters. If you are comfortable with basic hand tools, you can likely swap the old cylinder out yourself.
Door Lock Cylinders Set & Ignition Switch with Keys, for Ford F150/F250/F350 Pickup 1992-1995,Bronco 1992-1995, E150/250/350 Van 1992-1995, Ranger 1995, Replace Part Number C-42-150 DP-42-122
The Door Lock Cylinders Set & Ignition Switch with Keys for Ford F150/F250/F350 Pickup 1992-1995, Bronco 1992-1995, E150/250/350 Van 1992-1995, Ranger 1995, Replace Part Number C-42-150 DP-42-122 is a direct replacement kit designed for worn or failing lock systems. Over time, your Ford’s door lock cylinders and ignition switch can wear out from regular use. Excessive wear often leads to trouble turning the key or the key getting stuck.
This kit is built to replace those defective parts, restoring smooth operation to your vehicles locking system.
This set is compatible with a range of Ford models. It works with the Ford Aerostar 1994; Bronco 1992-1995; F150/F250/F350 Pickup 1992-1995; E150/E250/E350 Van 1992-1995; Crown Victoria 1990-1991; Ranger 1995; and Mercury Grand Marquis 1990-1991. Keep in mind that you should compare the pictures carefully and examine the details closly before buying.
The fitment list is broad, but visual confirmation helps ensure a perfect match for your specific vehicle.
Quality is a key focus here. Each ignition lock cylinder kit is tested for vehicle wear and goes through strict quality control. This testing helps make sure your locks and keys work consistantly over time. The performance standards are high too. The ignition lock cylinder sets undergo rigorous testing to deliver superior performance and a long service life.
2 Sets Door Lock Cylinder with Keys Fit for Ford Ranger 1993-1994, 1995-1996
The 2 Sets Door Lock Cylinder with Keys Fit for Ford Ranger 1993-1994, 1995-1996 is a direct replacement part designed to get your truck’s doors working smoothly again. These are total new cylinders, not refurbished, so you are getting a fresh start for your locks. The set includes two complete door lock cylinders and two matching keys.
This means you can replace both driver and passenger side locks at the same time, and you will have a spare key for each.
The manufacturer part numbers for this set are DL74060, F2UZ1522050A, F37Z1022050A, and F3TZ7822050B. The interchange part numbers include 5090051-01 and F4TZ-1522050-B. You can check these numbers against your current lock or your vehicle’s parts catalog to be sure.
While the product title says it fits the Ford Ranger 1993-1994 and 1995-1996, the part numbers also cover a broader range of Ford vehicles. According to the spec, it fits the E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, Ford F150, F250, F550 Super Duty, F650, F750, F800, and the Ranger. So if you own one of those trucks or vans from the mid-90s, theres a good chance this will work. Just double-check your year and model.
The installation is described as easy.
Door Lock Knob Grommets Pair For 1962-1967 Ford Fairlane
The Door Lock Knob Grommets Pair For 1962-1967 Ford Fairlane is a simple but important piece for your classic car. If you own a Fairlane from this era, you know the little things matter. These grommets are a direct replacement for the original ones that came on the car. They fit right into the door panel where the lock knob goes through. Over time, those old rubber or plastic grommets get brittle, crack, or just fall apart. When they go bad, your door lock knob rattles around.
It can even scratch up the paint around the hole. That is anoying and makes the interior look rough.
You need to check the specific fitments for your exact year. This pair is for 1962, 1963, 1964, 1965, 1966, and 1967 Ford Fairlane models. But not every Fairlane trim uses the same part. Some models have different door panel designs. The best way to know for sure is to look at your current grommet or consult a parts chart for your specific car.
If you have a standard Fairlane, it will likely work. If you have a higher trim like a 500 or a station wagon, you should double-check. The goal here is to give you a clean, snug fit so the lock knob stays put and does not wobble around as you drive.
Installing these grommets is straightforward. You just pop the old one out and push the new one in from the back side of the door panel. Then you slide the lock knob through it. No special tools needed.
Door Lock Knob Grommets Pair For 1968-1972 Ford F-250 Pickup Truck
The Dorman Door Lock Knob Grommets Pair For 1968-1972 Ford F-250 Pickup Truck
These grommets are a direct replacement for the door lock knobs on your 1968 to 1972 Ford F-250 Pickup Truck. They are designed to fit the factory knobs on your truck, restoring a tight and rattle-free connection to the lock mechanism. You might notice your old grommets are dried out, cracked, or simply missing after years of sun and use.
When the rubber or plastic wears away, the knob gets loose, can fall off, or just spins without actually turning the lock. These grommets solve that exact problem. Make sure to check the specific fitments below. This pair is intended for the F-250 models from those years, but it is always smart to verify your truck’s build date and trim. The parts are made from a durable material that holds up better than the originals, though you should expect some normal wear over time.
Installation is straightforward. You just remove the old, broken grommet from the back of the knob, slide the new one into place, and push the knob back onto the lock stem. It should click in firmly. No special tools are required, but a little patience helps if the plastic is stiff. One thing to keep in mind is that the fit can be snug. That is a good thing, because it means the knob will not wobble or fall off while you are driving. If you have a 1969 or 1970 model, the grommets work perfectly.
Door Lock Grommet Covers For 1995 Ford F150 Xlt Buying Guide
Replacing door lock grommet covers for 1995 ford f150 xlt ensures a perfect fit. You probably didn’t think much about these small plastic rings until yours fell apart. One day you go to lock your door and the rod just slips right out. Frustrating, right? These little pieces keep your lock rods connected to the handle mechanism. When they break, your door won’t lock properly. The good news is they’re cheap and easy to replace.
Material Quality and Durability
Not all grommets are made the same. Some use brittle plastic that cracks after a few months in the sun. Look for ones made from nylon or reinforced polymer. These hold up better against heat and cold. A soft rubber compound might feel nice at first, but it’ll wear out fast. Hard plastic lasts longer but can be tricky to install. Go with the middle ground – a sturdy but flexible material that snaps into place without fighting you.
OEM vs Aftermarket Options
Ford original parts cost more but guarantee the exact shape. Aftermarket ones are cheaper and sometimes work even better. The trick is checking reviews from other F-150 owners. Some aftermarket brands have redesigned the clip so it stays put better than the factory version. Just watch out for the super cheap no-name packs. They might save you two bucks but leave you stranded with a door that won’t close.
Installation Difficulty
You don’t need special tools for this job. Most grommets just push into the door panel hole. But here’s the thing – some designs require you to compress the tabs while pushing. Others have a simple snap-in system. If you have big hands, look for grommets with an easier installation method. Nobody wants to spend forty minutes cussing at a two-dollar part. Get the kind that clicks in without needing pliers or pry tools.
Compatibility Check
Your 1995 model sits right in the middle of the generation change. Some grommets fit 1992-1996 trucks, others only work on later years. Double check the listing says “1995 Ford F-150 XLT” specifically. Measure the hole diameter if you can. A 1/4 inch difference means the grommet won’t grip the rod correctly. Returning parts is annoying, especially for something so small. Take the five minutes to verify before you order.
Frequently Asked Questions About Door Lock Grommet Covers For 1995 Ford F150 Xlt
What exactly is a door lock grommet cover?
It’s a small plastic or rubber piece that fits around your door lock cylinder. It sits on the outside of your truck door. It protects the lock from dirt and moisture. It also gives your F150 a finished look.
Why do I need a new one for my 1995 Ford F150 XLT?
Over time, plastic gets brittle. Sun and weather can crack or break your old grommet. A missing one leaves the lock exposed. That can lead to rust or a stuck lock. Replacing it is cheap and easy.
Will these grommets fit both front doors?
Yes. The same grommet cover works for the driver and passenger side doors. Your 1995 Ford F150 XLT uses the same part for both. Just make sure you order the correct one for your model year.
How do I remove the old grommet cover?
It’s simple. Use a flathead screwdriver to gently pry it off. Be careful not to scratch your paint. You might need to wiggle it a bit. It usually comes off without much trouble.
Can I install the new one without any tools?
Most times, yes. The new grommet presses on by hand. Line it up with the lock cylinder. Push it in until it clicks or sits flush. It should fit snugly. No glue or special tools needed.
Do these covers come in different colors?
Yes. Many are black, but you can find other colors. For a 1995 Ford F150 XLT, black is the most common match. Check your truck’s trim to be sure. Some aftermarket options may have a slight color difference.
Will this fix a loose door lock handle?
No. The grommet cover only protects the lock cylinder itself. It won’t fix a wobbly handle. For that, you need a different part. The grommet is strictly for the lock area.
Is it a direct replacement for the factory part?
Yes. Most aftermarket grommets are made to match the original. They fit right in. You might see a small variation in shape, but it should work fine. Double-check the details before you buy.
How long does a new grommet last?
It depends on weather and use. A good quality one can last several years. UV-resistant materials help it hold up longer. Parking in the shade also helps. You’ll know it’s time to replace it when it cracks or falls off.
The Short Answer
You don’t need to let worn-out lock covers make your truck look rough. These parts slip right into place and stay put, even in rain and dirt. Your old covers likely cracked from sun and age, leaving the door lock exposed to rust. That’s a quick way to end up with a sticky lock that’s hard to turn. With a fresh set, you protect the metal from moisture and debris. The fit is snug and correct for a 1995 model, so you won’t fight with them during installation. Just press them in and you’re done. You’ll notice the difference right away when the door closes clean and the lock feels solid.
Don’t wait for the weather to mess up your locks any further. Order a set of door lock grommet covers for 1995 ford f150 xlt today. They’re a cheap fix that adds years of good service. Your truck will look better and work better with these covers in place. It’s a small job that gives you real peace of mind every time you drive.