Protect your vessel’s seating with durable covers designed for back-to-back configurations. We all love spending time on the water, but the sun and rain can realy do a number on your boat’s upholstery. That’s why you need quality back to back boat seat covers. They slip right over those double seats that face each other, keeping them safe from cracking and fading. You don’t want to deal with musty cushions or expensive repairs later.
These covers are built tough with weather-resistant materials. They fit snugly so wind won’t blow them away. Plus, they’re simple to put on and take off, which means more time enjoying your boat. Whether you’re storing her for the season or just covering up between trips, your seats will thank you. Its a small investment that keeps your boat looking sharp for years to come.
Product Comparison Table: 9 Best Back To Back Boat Seat Covers
| Image | Why We Like This Product | Editor’s Rating | |
 |
2 Pack Boat Seat Covers – Waterproof 900D Heavy…
|
9.7 |
Read Review |
 |
CrystalSylara 1 Set Back to Back Boat Seat Covers…
|
9.5 |
Read Review |
 |
CrystalSylara 1 Set Back to Back Boat Seat Covers…
|
9.3 |
Read Review |
 |
Boat Seat Cover Back to Back Double Seat Storage…
|
9.1 |
Read Review |
 |
Boat Seat Cover, Back-to-Back Double Seat Storage Cover, Waterproof…
|
8.8 |
Read Review |
 |
CrystalSylara Universal Boat Seat Covers Waterproof Sweat Back to…
|
8.6 |
Read Review |
 |
GliCraft Waterproof Universal Boat Swing Back Seat Cover Oxford…
|
8.4 |
Read Review |
 |
Tegeme 2 Pcs Back to Back Boat Seat Covers…
|
8.2 |
Read Review |
 |
Back to Back Boat Seat Covers， Replacement Boat Lounge…
|
8.0 |
Read Review |
Quick Review For Top 9 Back To Back Boat Seat Covers
2 Pack Boat Seat Covers – Waterproof 900D Heavy Duty Boat Folding Chair Cover – 18W x 20D x 14H inch, Grey.
The 2 Pack Boat Seat Covers – Waterproof 900D Heavy Duty Boat Folding Chair Cover – 18W x 20D x 14H inch, Grey are designed to keep your boat seats in top shape. You get two covers in this pack. They fit most pedestal boat folding chairs that measure 18 inches wide, 20 inches deep, and 14 inches tall. Just be sure to measure your own chair carefully before you buy. This is a universal fit type, so checking the size first is important for a good match.
No matter what brand your boat is, these covers offer solid protection.
The material is a big part of why these work so well. They are made from 900D marine grade polyester. This fabric has a waterproof laminated undercoating. That means rain, snow, and frost won’t soak through. The covers also resist UV rays, which helps stop your seats from fading in the sun. Double stitching is used throughought the construction. This improves the overall durability and makes them last longer.
You won’t have to worry about them falling apart after a few trips. They also keep dust and dirt off, so your chairs stay cleaner between uses.
The practical design makes using them very easy. A heavy duty elastic cord with a toggle lets you adjust the fit. You can pull it tight to get a snug fit around your chair. A quick-release buckle strap is located on the bottom side. This allows you to install or remove the cover very quickly.
CrystalSylara 1 Set Back to Back Boat Seat Covers Replacement Boat Lounge Seat Covers Waterproof Polyvinyl Chloride for Protector Boats Seats Deluxe Back-to-Back Lounge Seats Cover (Blue Grey)
The CrystalSylara 1 Set Back to Back Boat Seat Covers are a practical replacement for worn out lounge seating on your boat. These covers are built to fit back to back style seats, specifically those with a bottom half measuring 19 to 20 inches wide and 16 to 18 inches deep, and a top half that is 19 to 20 inches wide and 18 to 19 inches tall. The overall seat size is about 18 x 19 x 19 inches. You get a snug fit without any guesswork.
Putting these covers on is fast.
You just slide the vinyl skin right over your old seats. If you want a temporary fit, use the included elastic straps to hold them in place. For a more permanent look, you can staple the material behind the seat. This makes it easy to refresh your boat interior in an afternoon without any special skills. The material is made from waterproof polyvinyl chloride, which is soft and breathable. It doesn’t wrinkle easily, and it feels comfortable to sit on even during long days on the water.
The durability is solid, designed to handle the tough conditions of a marine environment like sun and moisture.
While these are made for back to back lounge seats, they also work for other seat types. You can pull the material tight and secure it for a custom look on different bench or bucket seats. This gives you a lot of flexibility if you have a uniqe seating setup. The main goal is protection. Your seats will be safe from fading, cracking, and everyday wear.
CrystalSylara 1 Set Back to Back Boat Seat Covers Replacement Boat Lounge Seat Covers Waterproof Polyvinyl Chloride for Protector Boats Seats Deluxe Back-to-Back Lounge Seats Cover (Blue White)
The CrystalSylara 1 Set Back to Back Boat Seat Covers are a practical solution for anyone dealing with worn or cracked marine seating. These covers are specifically designed for back to back boat lounge seats, so you don’t have to worry about a sloppy fit. They work best for seats that measure around 18 x 19 x 19 inches overall. For the bottom half, you are looking at a width of 19 to 20 inches and a depth of 16 to 18 inches.
The top half fits seats that are 19 to 20 inches wide and 18 to 19 inches tall. If your seats fall within those ranges, these covers should slip on nicely.
Getting them installed is pretty straightforward. You can slide the vinyl cover right over your old seat and use the included elastic straps for a quick temporary fit. If you want something more permanent, you can staple the material behind the seat for a tight, clean look.
This saves you time and effort compared to reupholstering the whole thing. The material is made from waterproof polyvinyl chloride, so it holds up well against the marine environment. It is soft and breathable, and it does not wrinkle easily. You get a comfortable surface to sit on without that stiff plastic feeling.
These covers are built to last. They resist fading, cracking, and the daily wear that comes from sun and saltwater.
Boat Seat Cover Back to Back Double Seat Storage Cover, Waterproof Marine Seat Protector, Heavy Duty, 50" L x 22" W x 22" H
The Boat Seat Cover Back to Back Double Seat Storage Cover is a heavy duty waterproof marine seat protector. It is designed for back to back seats up to 50 inches deep, 22 inches wide, and 22 inches high. This cover is a practical solution for keeping your boat seats in good shape, no matter the weather.
You will find it is completly waterproof. This means it can prevent damage from rain, snow, frost, and even dust.
It also protects against rust and scratches, giving your seats year-round protection. This is a simple way to keep your gear safe when the boat is not in use.
The cover is made from a heavy duty 420D oxford polyester. This material is U-V and weather resistant, so it holds up well under the sun and in harsh conditions. There are reinforced air vents on each side. These vents allow for air flow, which helps prevent moisture buildup under the cover.
The material is tough but still easy to handle.
One of the best features is the bottom elastic hem design. This is a smart addition. It helps the cover stay tight and secure around the seat. You do not have to worry about it being blown away by strong winds. It will not blow off even at high speeds when your boat is moving. This gives you peace of mind when you are on the water.
Setting up this cover is very easy. It goes on in seconds and requires no assembly at all.
Boat Seat Cover, Back-to-Back Double Seat Storage Cover, Waterproof Seat Protector, Heavy Duty 420D Oxford, UV Resistant, 50" L x 22" W x 22" H
The Boat Seat Cover, Back-to-Back Double Seat Storage Cover is designed to protect your marine seating when its not in use. This cover is made for back-to-back boat seats, so if you have a lounge seat that flips forward and backward, this should fit well. It covers seats up to 50 inches long, 22 inches wide, and 22 inches high.
You get full coverage for the whole unit during storage, which helps keep the fabric and foam in good shape.
This cover is waterproof, which is really its main job. It helps protect against rain, snow, dust, and dirt. If you leave your boat outside or on a lift, this cover keeps the seat dry and clean. You dont have to worry about morning dew or a sudden shower soaking the cushion.
It also blocks out dust when your boat is parked in a garage or driveway.
The material is heavy duty 420D Oxford polyester. This is a tough fabric that can handle outdoor conditions. It also has UV protection built in. Sun exposure can cause boat seats to fade and crack over time, but this cover helps reduce that damage. It wont stop all fading, but it gives a good layer of defense. The fabric feels sturdy without being too stiff.
Getting it on and off is easy.
CrystalSylara Universal Boat Seat Covers Waterproof Sweat Back to Back Boat Seat Protector Hawaiian Tropical Parrot Flower Design for Fishing Deck Pontoon Car Seats and More
The CrystalSylara Universal Boat Seat Covers are a practical solution for anyone wanting to keep their seats fresh and protected. Whether you are a pontoon boat owner or a fishing enthusiast, this cover is designed to fit your life. It measures roughly 19 by 22 by 32 inches, with a bottom half that fits 18 to 19 inches wide and 20 to 22 inches deep. The top half is about 18 to 19 inches wide and 30 to 32 inches tall. This means it fits most pontoon boat seats like a glove.
You can use it on a fishing deck, a pontoon, or even a car seat. It helps extend the lifespan of your seats and keeps their value high. The material is a soft towel cloth with a Hawaiian tropical parrot flower pattern. It looks fun and feels comfortable. Small dot adhesives on the bottom, plus an anti slip backing, keep the cover firmly in place. It works on pontoon seats, computer chairs, and office chairs without sliding around. You get a good seating experience every time.
Protection is a key part of this cover. It shields your seats from salty seawater, spills, dirt, scratches, cracking, fading, and even pet hair. Whether you are on a marine adventure, working at your desk, or relaxing on a single sofa at home, your seats stay clean and look new. It is waterproof and sweat proof, so you dont have to worry about moisture damage. Installing the cover is very simple. You just slip it over your seat and adjust it for a nice fit.
GliCraft Waterproof Universal Boat Swing Back Seat Cover Oxford Leaning Post Swingback Cooler Boat Seat Cover 36" H x 36" W x 20" D, Gray
The GliCraft Waterproof Universal Boat Swing Back Seat Cover Oxford Leaning Post Swingback Cooler Boat Seat Cover is a straightfoward solution for protecting your boat’s seating. It measures 20 inches deep, 36 inches wide, and 36 inches high. This size is designed to fit most swing back seats, leaning posts, and swing back cooler seats on the market. You should measure your seat before ordering to be sure it will fit properly.
The cover is made from heavy duty 600D Oxford fabric.
It has a PVC laminated undercoating that makes it fully waterproof. This material keeps your seat dry and stops dust from building up. You will not need to clean your seat as often, and you can use it anytime without wiping it down first. The fabric also blocks direct sunlight, which helps prevent fading and cracking. This slows down wear and tear and extends the life of your boat seat.
There are a few practical design features worth noting.
Vents on the top of the cover allow air to circulate. This stops moisture from collecting underneath, which keeps the seat dry. The bottom hem can be tightened to stop the cover from blowing away in windy weather. Installation is simple—you just put the cover over the seat and pull the hem tight. When you are not using it, the cover folds up neatly into the included storage bag.
This cover offers strong protection against sea water, rain, dirt, and dust.
Tegeme 2 Pcs Back to Back Boat Seat Covers Replacement Waterproof Boat Lounge Seat Covers Durable Microfiber Fabric and Cotton Filling Boats Cover for Protector Boats Marine Lounge Bench Seats
The Tegeme 2 Pcs Back to Back Boat Seat Covers Replacement are designed to give your boat’s lounge seats a fresh, protected look. This set includes two covers that fit most back-to-back boat seats and recliner-style furniture. The dimensions are roughly 17 x 20 x 19 inches. The lower section measures 18-20 inches wide and 15-17 inches deep, while the upper section is 18-20 inches wide and 18-19 inches high. The non-slip fabric works on both fabric and leather seats.
Just make sure to check your seat measurements before buying, so you get the right fit.
These covers are built to last. They use a three-layer structure with thick microfiber fabric and cotton filling. This combo is durable and helps protect your seats from everyday wear. The bottom has round adhesive dots that stop the cover from sliding around. It adapts to different seat materials and stays put, so you don’t have to keep ajusting it.
The materials are tough but still feel comfortable to sit on.
Installation is straighforward. The cover has a hook-and-loop closure in the center, which works even when the seat is fully extended into a lounge chair. You can slip the included elastic band over the old seat for a quick temporary fit. Or you can secure it to the back for a tight, permanent fit. It takes just a few minutes to get it on, and you don’t need any special tools.
Protection is a key feature here.
Back to Back Boat Seat Covers， Replacement Boat Lounge Seat Covers, Soft Microfiber Fabric, 100% Waterproof Boat Covers for Damaged Seats (2 Sets Gray Brown)
The Back to Back Boat Seat Covers are a practical replacement for worn or damaged lounge seats on your boat. The package includes 2 sets, meaning you get covers for 4 seats total. They are specifically made for back to back configurations, so they fit properly even when you flip the seat open into a lounger. No more struggling with a cover that bunches up or slides off.
These covers are made from a soft microfiber fabric.
It feels comfortable against your skin, which is nice if you spend long days on the water. The material is also wrinkle-resistant and durable. More importantly, it is 100% waterproof. This means rain, splashes, or spills from drinks are not going to soak through to the foam underneath. Your original seats stay dry and protected.
The main job of these covers is protection.
They shield your boat seats from everyday damage like scratches from fishing gear, saltwater spray, dirt, stains, and even frost if you store your boat outside. Instead of worrying about every little spill, you can relax and enjoy your time on the water. The covers help your lounge seats look newer for longer.
Installation is straightforward. The covers are professionally designed to stay in place. They grip the seat securely and do not shift around easily when you sit down or move.
Back To Back Boat Seat Covers Buying Guide
Back to back boat seat covers require weatherproof fabric and precise fit for marine use. You already know that the sun, rain, and salt spray can ruin your seats fast. But not all covers are the same. Some are just glorified tarps. Others are engineered to fight the elements. The trick is finding one that fits snug and lasts more than a season. Let’s break down what actually matters.
Fabric weight and waterproofing
Thin fabric won’t cut it. Look for at least 300 denier material. Heavier fabric resists tearing and holds up against UV rays. A waterproof coating is non-negotiable, but breathability matters too. Without it, moisture gets trapped underneath, causing mold. Your seats will smell like a wet dog in no time. Polyester with a PVC backing is a solid bet. It keeps water out while letting air escape.
Seam construction and zipper quality
Cheap stitching falls apart after a few trips. Double or triple stitching is what you want. The seams should be taped or sealed to prevent water sneaking through. Zippers are often the weak spot. Plastic zippers break, especially in cold weather. Metal zippers last longer but can corrode if not coated. Go with heavy-duty, corrosion-resistant zippers. You don’t want to wrestle with a stuck zipper when you’re trying to cover your seats.
Fit and adjustability
One-size-fits-all is a lie. Back to back seats have unique shapes, with a fold-down backrest and separate bench area. A loose cover flaps in the wind and lets rain pool on top. Look for adjustable straps, shock cords, or buckles. These let you cinch the cover tight around the contours. Some covers have elastic hems that grip the bottom. That helps keep everything in place during a bumpy ride home.
Ventilation panels
Ever pulled off a cover and found condensation underneath? That’s a problem. Vent panels allow airflow while blocking rain. They reduce moisture buildup and prevent mildew. If your cover lacks vents, you’re asking for trouble. Most quality covers include mesh vents on the sides. Check that the vents are positioned away from direct water paths. A small detail, but it makes a big difference over time.
Frequently Asked Questions About Back To Back Boat Seat Covers
What exactly is a back to back boat seat cover?
It’s a cover made for those folding seats that flip from forward to backward. They fit snugly over the whole seat, including the backrest and bottom. You get complete protection from sun, rain, and bird droppings.
How do I measure my seat for the right cover?
First, measure the width of the seat bottom. Then measure the height of the backrest when it’s fully upright. Don’t for get to check the depth too. Most covers are sized by these three measurements. Write them down before you shop.
Are these covers waterproof?
Most are water-resistant, not fully waterproof. They use materials like polyester or vinyl with a coating. Heavy rain might seep through seams over time. For full waterproofing, look for covers with sealed seams and a thick marine-grade fabric.
Will the cover fit if my seat has armrests or a headrest?
It depends on the design. Some covers are universal and stretch over basic seats. Others are custom-fit for specific models. Measure your armrests and headrests. Check the product description for “fits with armrests” or “headrest compatible.”
How do I clean and maintain the cover?
Just hose it off with fresh water after each trip. For stains, use mild soap and a soft brush. Let it air dry completely before storing. Avoid bleach or harsh cleaners—they damage the fabric. Store it in a cool, dry place when not in use.
Can I use these covers in winter storage?
Yes, they work great for winter. But make sure the cover is breathable. A non-breathable cover traps moisture, which causes mold. Look for covers with vented panels or mesh. This allows air to circulate while keeping snow and ice off.
How tight should the cover fit?
It should be snug but not too tight. A loose cover flaps in the wind and can scratch your seat. A overly tight cover might strech the material or pop seams. Aim for a secure fit that stays in place without effort.
Do I need to remove the cover when the boat is moving?
It’s not necessary, but check it’s secure. High speeds can cause flapping. Some covers have straps or buckles to hold them down. If you’re towing the boat, remove the cover to avoid damage from wind pressure.
Bottom Line
Shield your boat’s facing seats from sun and rain with these durable, custom-fit covers. You don’t need to stress over weather damage anymore. Just pull them on before you leave the dock. They fit snugly and stay put, even in wind. The material is tough but easy to clean. A quick wipe and they look new again. No more faded fabric or soaked cushions. Your seats will last longer and stay comfortable. That means more time on the water and less time fixing things. Plus, the covers come in neutral colors that match any boat. They are simple to install and remove. No tools required. You can put them on in under a minute. That leaves you more time for fishing or relaxing.
For added peace of mind, choose a set that is UV-resistant and waterproof. These covers block harmful rays and keep rain out. You won’t have to worry about mold or mildew build up. They also prevent scratches from debris. It’s a small investment that saves you big repairs down the road. Whether you store your boat outside or on a trailer, protection matters. The custom fit means no flapping or shifting. Just a secure, clean look every time. So go ahead and enjoy your day out. When you come back, your seats will be ready for the next adventure. Pick up a pair of back to back boat seat covers today and keep your ride in top shape.