Protect your vehicle’s fog lights from rocks and debris with these durable covers. You’re driving down a gravel road, and suddenly—bam. A stray rock hits your fog light. Without proper fog light covers, that expensive housing is toast. These tough shields are the simple fix you’ve been looking for. They install in minutes and keep your lights safe from the worst the road throws at them.
But these covers do more than just protect. They also give your car a custom, rugged look that screams “off-road ready.” You’ll save money on replacments and enjoy peace of mind every time you drive. Trust me, your wallet will thank you later.
Product Comparison Table: 9 Best Fog Light Covers
| Image | Why We Like This Product | Editor’s Rating | |
 |
GRAND ORANGE Fog Light Cover Set Compatible with Chevy…
|
9.8 |
Read Review |
 |
PIT66 Fog Light Covers, Compatible with Malibu Eco 2013-2014/Malibu…
|
9.5 |
Read Review |
 |
MOTOKU Front Driver and Passenger Side Fog Light Cover…
|
9.3 |
Read Review |
 |
DNA MOTORING FL-ZTL-273 Front Bumper Fog Light With Bezel…
|
9.0 |
Read Review |
 |
VPIMOZO Fog light Cover Front Bumper Compatible with 12-14…
|
8.8 |
Read Review |
 |
NewYall Set of 2 Driver and Passenger Side Front…
|
8.5 |
Read Review |
 |
NewYall Pair Fog Light Cover Bezel for Honda Accord…
|
8.2 |
Read Review |
 |
munirater 2-Pack Fog Light Hole Cover Driver & Passenger…
|
8.0 |
Read Review |
 |
MOTOKU Front Left Driver and Right Passenger Side Fog…
|
7.7 |
Read Review |
Quick Review For Top 9 Fog Light Covers
GRAND ORANGE Fog Light Cover Set Compatible with Chevy Malibu 2013 2014 2015 2016, 20768847 20768848 GM1039141 GM1038141 Left Driver & Right Passenger Side Black Fog Light Covers
The GRAND ORANGE Fog Light Cover Set Compatible with Chevy Malibu 2013 2014 2015 2016 is a direct-fit replacement designed for the left driver and right passenger sides. These black fog light covers are built to restore the look of your front bumper without needing any modifications.
This set fits a range of Chevy Malibu models. It is compatible with the Chevy Malibu Eco from 2013 to 2014. It also works with the Chevy Malibu LS and LT trims from 2013 to 2015.
If you own a 2016 Chevy Malibu Limited in the LS or LT trim, this set will fit as well. The covers replace OEM part numbers 20768847 and 20768848, as well as GM1039141 and GM1038141.
The covers are made from durable ABS plastic. This material holds up well against impacts, UV rays, and tough weather. You do not need to worry about them cracking or fading quickly.
The structure is stable and not easy to break off, so they stay put even on rough roads.
The design is made to match your vehicle exactly. They integrate with the existing front grille for a factory-like appearance. You will not see awkward gaps or mismatched edges. The black finish blends in naturally with most bumper colors, so the covers look like they came with the car.
These covers meet Original Equipment (OE) standards.
PIT66 Fog Light Covers, Compatible with Malibu Eco 2013-2014/Malibu 2013-2015(submodel: LS, LT)/Malibu Limited 2016 (submodel: LS, LT) 2 Pcs Left & Right Side Fog Light Cover
The PIT66 Fog Light Covers are made for the 2013-2014 Malibu Eco, the 2013-2015 Malibu (LS and LT trims), and the 2016 Malibu Limited (LS and LT trims). This set includes two covers, one for the left side and one for the right side. They are a direct replacement for the factory parts, with reference numbers like 20768847 and GM1039141.
These covers are built to be tough. The sealed design helps keep moisture and dust out, no matter the weather.
This means they can handle rain, snow, and road debris without cracking or fogging up. The material is impact resistant, so a stray rock or a bump won’t easily damage them. You get a durable part that stands up to daily driving conditions.
Installation is simple. These covers are a plug-and-play fit. You just bolt them on directly, no modifications needed. They attach exactly like the original parts, so you wont need any special tools or extra hardware.
It should take you only a few minutes per side to get them in place.
Before you buy, double check your cars trim level and year. They work for the Malibu Eco from 2013 and 2014, the standard Malibu LS and LT from 2013 to 2015, and the Malibu Limited LS and LT from 2016. If your car is a different trim or year, they might not fit. Its a good idea to confirm with your vehicles specs to be sure.
What you get in the package is one pair of fog light covers.
MOTOKU Front Driver and Passenger Side Fog Light Cover Bezel for Dodge Journey 2011-2020
The Motoku Front Driver and Passenger Side Fog Light Cover Bezel for Dodge Journey 2011-2020 is a direct fit replacement part. It is designed to match the original factory specifications. This bezel covers the fog light housing on both the driver and passenger sides of your vehicle. It is specifically made for the Dodge Journey model years 2011 through 2020.
If you have a Journey from that range, this part should work without any modifications.
You might need this bezel if your current one is cracked, faded, or broken. Over time, plastic parts on the front of your car take a beating from road debris, weather, and UV rays. This cover restore the look of your front bumpera and gives the fog light area a clean, finished appearance. It is a simple exterior trim piece, so it does not affect how the fog lights function.
It just makes things look right again.
The bezel comes as a set for both sides. That means you get the cover for the left and the right fog light in one package. Installation is straight forward. You remove the old bezel and snap the new one into place. No special tools are needed. It is a good idea to check the clips on your vehicle to make sure they are not damaged before you install the new part.
DNA MOTORING FL-ZTL-273 Front Bumper Fog Light With Bezel Driver & Passenger Side Enhance visibility [Compatible with 12-14 Subaru Impreza]
![DNA MOTORING FL-ZTL-273 Front Bumper Fog Light With Bezel Driver & Passenger Side Enhance visibility [Compatible with 12-14 Subaru Impreza]](https://m.media-amazon.com/images/I/51KIKFFZk0L._SL500_.jpg)
The DNA MOTORING FL-ZTL-273 Front Bumper Fog Light With Bezel Driver & Passenger Side is designed to give your 2012 to 2014 Subaru Impreza a clearer view of the road. This set is made for the non-WRX and non-STI models only, so double check your trim before you order. It includes both the driver and passenger side fog lights, plus the bezels that frame them. You get everything you need in one box.
Visibility is the main reason to install these.
They help you see better at night, in heavy rain, in snow, or during dense fog. The light cuts through bad weather so you can spot obstacles, animals, or sharp turns sooner. They also give your car a different look. If your old fog lights are faded, cracked, or just not working anymore, this set is a simple way to freshen up the front end. Some people use them for show cars too, because the bezels give a clean, finished appearance.
Installation is straight forward.
You don’t need to drill anything or make custom modifications. They bolt directly into the factory mounting spots. This makes it easy to swap out old and worn fog lights without a trip to the mechanic. Most people can do it in their driveway with basic hand tools. The set comes with the bezels pre-attached, so you won’t have to fiddle with extra parts.
Quality is taken seriously here. These lights are S.A.E. and D.O.T. approved.
VPIMOZO Fog light Cover Front Bumper Compatible with 12-14 2012 2013 2014 Subaru Impreza Matte Black Replacement Fog Light Bezel Driver&Passenger Side (Not Fit WRX Models)
The VPIMOZO Fog Light Cover Front Bumper is made for the 2012, 2013, and 2014 Subaru Impreza. It is a direct replacement for the factory fog light bezels on the driver and passenger side. Just a heads up, this part does not fit WRX models, so double check your Subaru model before ordering. The product replaces part numbers 57731FG200, 57731FG210, 57731FJ000, and 57731FJ010.
These bezels are built from high-quality ABS plastic. The material is tough and built to last.
Each unit goes through strenous testing for strength and durability. You can trust that this cover will hold up against daily driving and road debris. The matte black finish gives your car a clean, sporty look that blends well with the front bumper.
One of the best features is the IP67 waterproof rating. This means the housing is sealed tight against water and dust. Rain, fog, or a car wash won’t cause moisture to build up inside.
The design prevents water vapor from getting in, which keeps the electrical parts safe and the light output clear. It is a simple upgrade that adds real protection to your vehicle’s front end.
Installation is straight forward and takes less than 10 minutes. You do not need any special tools or a mechanic. Just pop off the old bezel and snap the new one into place. The fit is precise, so it sits flush against the bumper.
NewYall Set of 2 Driver and Passenger Side Front Fog Light Cover for Toyota Camry 2007-2009
The NewYall Set of 2 Driver and Passenger Side Front Fog Light Cover for Toyota Camry 2007-2009 is a direct fit replacement part. It is designed specifically for your car. You won’t need to modify anything to make it work. These covers are for the driver and passenger side front fog lights. They are not the fog light bulbs or assemblies themselves. They are the plastic trim pieces that sit around the lights.
If your current fog light covers are cracked, faded, or missing, these will restore the look of your front bumper. They also help protect the actual fog light housings from road debris.
The set includes two covers. One is for the left side, and one is for the right side. The product is made from durable ABS plastic. This material is strong and can handle weather changes. It is also paintable if you want to match your car’s color perfectly.
But the factory black finish works fine for most people. The covers clip into place using the existing mounting points on your Camry. There is no special tools required for installation. You can do it yourself at home in a few minutes. Just pop off the old cover and snap the new one in. Make sure the tabs are aligned correctly before you push it in.
This part is for the Toyota Camry years 2007, 2008, and 2009. It fits both the SE and LE trims. It dos not fit the hybrid model.
NewYall Pair Fog Light Cover Bezel for Honda Accord 2006 2007 Left and Right Side 71103-SDA-A00 71108-SDA-A00 71103SDAA00 71108SDAA00 HO1039107 HO1038107
The NewYall Pair Fog Light Cover Bezel for Honda Accord 2006 2007 Left and Right Side is a direct replacement part designed to restore the look of your car’s front end. If your original fog light bezels are cracked, faded, or just looking tired, this set gives you a clean, factory-like appearance without any fuss. It comes as a pair, so you get both the driver and passenger sides in one package.
The part numbers—71103-SDA-A00 and 71108-SDA-A00—match the OEM specs for these model years.
These bezels are made for the Honda Accord from 2006 to 2007 only. So if you own a sedan or coupe from those years, you are in the right zone. The fitment is meant to be exact, so you shouldn’t have to force anything or do any modifications. Just pop off the old ones and snap these on. They are built from durable plastic that holds up against weather and road debris.
Over time, the factory plastic can get brittle or hazy, but these replacements look fresh right out of the box.
You don’t need any special tools for this job. A simple trim removal tool or a flathead screwdriver wrapped in tape can help you pry off the old bezels without scratching the bumper. The new ones click into place securely. It is a small change that can make a big diffrence in how your car looks from the front.
munirater 2-Pack Fog Light Hole Cover Driver & Passenger Side Replacement for Accord 2013-2015 Sedan 71112T2AA00, 71102T2AA00
The munirater 2-Pack Fog Light Hole Cover Driver & Passenger Side Replacement for Accord 2013-2015 Sedan 71112T2AA00, 71102T2AA00 is a straightforward solution for a common visual gap. If your Honda Accord sedan from 2013, 2014, or 2015 didnt come with factory fog lights, youve probably noticed the empty holes in the lower bumper. These covers are designd to fill those openings, giving the front end a cleaner, more finished look.
No more seeing the bare mounting points or the wiring behind the bumper. These covers are a direct replacement for the original parts. The part numbers are 71112T2AA00 for the left side and 71102T2AA00 for the right side. They also cross-reference with HO1039112 and HO1038112. The package includes one cover for the drivers side and one for the passenger side, so you get both pieces needed to complete the job. The covers are made from durable plastic with a textured black primed finish.
This is a factory-style texture, so it matches the surrounding bumper material well. The black primer is ready to be painted if you want to match your cars exact color, but it also looks fine left as-is for a subtle dark accent. They are specifically designed for models without factory fog lights, so you dont have to worry about fitment issues with aftermarket lighting. Installation is a simple modification that can dress up the front end a bit.
MOTOKU Front Left Driver and Right Passenger Side Fog Light Bezel Cover for Journey 2011 2012 2013 2014 2015 2016 2017 2018
The MOTOKU Front Left Driver and Right Passenger Side Fog Light Bezel Cover for Journey 2011 2012 2013 2014 2015 2016 2017 2018 is a direct replacement part designed to restore the look of your Dodge Journey. These bezels are the trim pieces that frame your fog lights, so if yours are cracked, faded, or missing, this set gets you back to a clean, factory appearance.
These are not aftermarket modifications. They are built to match the original equipment specifications for your Journey.
The set includes both the driver side and passenger side covers, so you get everything you need in one package. No need to search for each side separately.
Compatibility is key here. These bezels are made specifically for the Dodge Journey model years 2011 through 2018. If you drive one of those years, they should fit without issues. The parts numbers 68088687AA, 68088687AB, 68088686AA, and 68088686AB are the OEM references.
You can check your current bezel for one of these numbers to confirm a match. This makes sure you are ordering the correct part for your vehicle.
Installation is straightforward. You remove the old bezel and snap the new one into place. It is a simple process that most people can handle at home with basic tools. No special skills or professional help is required.
Fog Light Covers Buying Guide
Protect your vehicle’s fog lights with durable covers. Here’s what to consider. Nobody wants to replace a cracked lens because a rock flew up on teh highway. That’s where a good set of covers steps in. They shield the glass or plastic from debris, road salt, and even minor bumps. Beyond protection, they can change the look of your front end. But not all covers are the same. You need to match them to your driving habits and your car’s style. Let’s break down the key factors so you make the right choice.
Material Matters
First up, what are they made of? Polycarbonate is the heavy hitter here. It’s tough, impact-resistant, and handles weather well. You might also see acrylic or ABS plastic. Acrylic is clearer but can crack easier. ABS is cheaper but less durable. Ask yourself: do you spend more time on gravel roads or smooth pavement? If rocks are common, go polycarbonate. A small scratch might show up over time, but that’s better than a shattered fog light. Also check if the material is UV-coated. Sun damage can make covers foggy, which defeats thier purpose.
Fit and Style
Does it fit your specific model? That sounds obvious, but some covers are “universal.” Those rarely look right. Look for vehicle-specific options. They snap or screw on perfectly. Then there’s style. You can get clear covers that keep the factory look. Or go with smoked or tinted ones for a stealthy appearance. Just remember: tinted covers reduce light output. If you drive often in fog or heavy rain, clear is safer. Matching the covers to your car’s color or trim can also tie the whole front end together.
Installation and Venting
How do they go on? Some use adhesive tape, others use screws or clips. Tape is easy but might fail in extreme cold. Screws are more secure but require drilling. Pick what you’re comfortable with. Another thing: venting. Fog lights get hot. Covers without vents can trap heat and damage the bulb or housing. Look for designs with small vents or gaps. This lets heat escape without letting in debris. A cover that overheats your lights is a cover you’ll regret.
Frequently Asked Questions About Fog Light Covers
What exactly are fog light covers?
Fog light covers are protective shields that go over your fog lights. They are usually made from plastic, polycarbonate, or metal. Their main job is to keep rocks, dirt, and debris from damaging teh light lens. They can also give your vehicle a cleaner or sportier look.
Do I need fog light covers on my car?
You don’t absolutely need them, but thay are very helpful. If you often drive on gravel roads or in bad weather, they are a good idea. They save you from having to replace expensive fog light assemblies. They also help if you want to customize your car’s front end.
Will fog light covers block my lights?
It depends on the type you choose. Some covers are clear and let light through just fine. Others are tinted, which can reduce light output a bit. If you use your fog lights a lot in heavy fog, go with clear covers. For looks only, tinted ones are fine. Always check your local laws on light tinting.
How do I install fog light covers?
Installation is usually simple. Most covers clip or screw directly into place. You might need a screwdriver or a plastic pry tool. Some come with adhesive tape. Always read the instructions first. If you are not sure, a mechanic can do it in minutes.
Are they hard to clean?
Not at all. Just wash them with soap and water like the rest of your car. Be careful with abrasive cleaners if the covers are tinted or painted. A soft cloth works best to avoid scratches.
Can I use fog light covers in winter?
Yes, but some materials handle cold better. Polycarbonate covers are tough and resist cracking. Metal covers can get very cold and might corrode if not coated. Check the product description for winter use.
Will they fit my specific car model?
Most covers are made for specific makes and models. Make sure to check the compatibility list before buying. Universal covers exist but may not fit perfectly. Measure your fog lights if you are unsure.
Do covers affect the warranty on my fog lights?
Usually no, but it depends on the manufacturer. If you install them properly without modifing the lights, you should be fine. Check your vehicle’s warranty terms to be safe.
The Short Answer
That’s teh bottom line. You need clear lights to stay safe when the weather turns nasty. Fog, rain, and dark roads all test your visibility. Damaged or yellowed covers make things even harder. So take a minute to check your current pair. If they look worn or cracked, it’s time for a swap. The good news is replacement is fast and easy. You don’t need special tools. Just pop the old ones off and click the new ones in. Then you can get back on the road with confidence. It’s a simple fix that makes a big difference.
Secure your lights now and drive clear through fog, rain, and dark nights. You will see better and other drivers will see you. That means fewer close calls and less stress behind the wheel. Don’t wait for a crack to spread or a lens to fog up completly. A fresh set of fog light covers keeps your car looking sharp and your trip safe. Grab yours today and enjoy the peace of mind that comes with a clear view ahead.