Find the replacement parts you need to restore your truck cover’s function. Your tonneau cover takes a beating from weather, road debris, and daily use. Over time, components wear out. That’s when you need reliable rough country tonneau cover parts to get things working like new again. Whether a latch is sticking or a hinge has snapped, you do’nt have to replace the whole system. Just swap the broken part and your back on the road.
Don’t stress about tracking down obscure pieces. We’ve lined up the best options for replacement rails, clamps, and seals. These parts fit seamlessly and install with basic tools. You’ll save money and avoid hassle. Ready to restore your cover’s function? Let’s find exactly what you need to get your truck protected and looking sharp again.
Product Comparison Table: 9 Best Rough Country Tonneau Cover Parts
| Image | Why We Like This Product | Editor’s Rating | |
 |
Truck Tonneau Cover Replacement Installation Accessory | Fit for…
|
9.5 |
Read Review |
 |
CODUPAX Stainless Steel Truck Tonneau Cover Replacement and Accessories…
|
9.3 |
Read Review |
 |
2 Set 254A0001 Tonneau Cover Clamp Service Kit -…
|
9.2 |
Read Review |
 |
Tonneau Cover Clams Universal Replacement Parts for Hard Folding…
|
9.0 |
Read Review |
 |
356A0014 Lock Knob Compatible with BAKFlip MX4 G2 Bed…
|
8.8 |
Read Review |
 |
Rough Country Hard Flip Up Truck Bed Tonneau Cover…
|
8.6 |
Read Review |
 |
Rough Country Hard Roll-Up Tonneau Cover for Ford F-250…
|
8.4 |
Read Review |
 |
Rough Country Soft Tri-Fold Tonneau Cover for Ford F-150…
|
8.3 |
Read Review |
 |
Rough Country Hard Tri-Fold Tonneau Cover for Ford F-150…
|
8.1 |
Read Review |
Quick Review For Top 9 Rough Country Tonneau Cover Parts
Truck Tonneau Cover Replacement Installation Accessory | Fit for Tri-fold & Quad-fold Truck Bed Cover Hard Folding | Include T-bar (T-Bolt), Tonneau Cover Front Clamp, 2X Rear Clamp
The Truck Tonneau Cover Replacement Installation Accessory is a practical kit made for owners of tri-fold or quad-fold hard folding truck bed covers. This is not a universal part, so you need to check that your current cover is one of those two types before you buy.
It includes everything you need to replace worn or broken mounting hardware: two front clamps, two triangle screws, two rear clamps, and four T-bars (also called T-bolts).
The front clamps are the pieces that secure the front of your tonneau cover to the bed rail. They are built from a mix of premium plastic and aluminum. This combo gives you a good balance of strength and light weight. The plastic parts resist rust, while the aluminum adds stiffness where it counts.
The two triangle screws are small but important—they help lock the front clamps in place without stripping out over time. You will use them to tighten the clamp down firmly.
For the back of the bed, you get two rear clamps. These hold the tailgate end of the cover secure. They also use the same plastic-and-aluminum construction, so they should hold up against weather and road vibration. The four T-bars are the main fasteners that slide into the tracks on your cover’s frame.
CODUPAX Stainless Steel Truck Tonneau Cover Replacement and Accessories Part Kit for Hard Truck Bed Cover Include T-Bolt, Rear Clamp(2 Pack)
The CODUPAX Stainless Steel Truck Tonneau Cover Replacement and Accessories Part Kit for Hard Truck Bed Cover Include T-Bolt, Rear Clamp(2 Pack) is built for a simple job: keeping your hard truck bed cover locked down tight. This kit is not a full cover, but a targeted replacement part set. It comes with two rear clamps and the necessary T-bolts, all designed to work with most hard quad-fold or tri-fold tonneau covers. Before you buy, there is one important thing to check.
This kit fits most series of hard folding covers, but not all of them. The product images include detailed size data. You need to strictly measure the width of your cover rails and the diameter of the existing bolts. If the T-bolt or clamp dimensions don’t match your setup, it will not work. Take a minute to compare, as returning hardware can be a hassle. If you have any doubt, just contact the seller directly before ordering. The parts are made from a mix of premium plastic and stainless steel.
The M6 T-Bolt is stainless steel, which gives you good water and weather resistance. The plastic clamps are durable and hold up to sun and rain without rusting. This combination gives you a stable, long-lasting hold for your bed cover, even on bumpy roads. Installation is strightforward. The clamp design is a simple clamp-on lock. You do not need to drill any holes in your truck bed. Just slide the T-bolt into the rail, position the clamp, and tighten it down.
2 Set 254A0001 Tonneau Cover Clamp Service Kit – Elevator Bolt Assembly, Fit for Hard Folding Truck Bed Tonneau Cover, Universal Fit
The 2 Set 254A0001 Tonneau Cover Clamp Service Kit – Elevator Bolt Assembly is a practical replacement part designed for hard folding truck bed tonneau covers. This kit is all about keeping your cover securely attached to your truck, so you don’t have to worry about it coming loose on the road.
This product is an MPN 254A0001 service kit. It is specifically made to fit hard folding truck bed tonneau covers.
The fit is universal, meaning it should work with a wide range of truck models that use a similar clamping system. If you have an expensive tonneau cover that needs fixing, buying these bolts is a smart move. It is much cheaper than replacing the entire cover just because a few small parts wore out.
The main function of the 254A0001 Elevator Bolt Assembly is to hold the cover firmly in place.
Once installed, the elevator bolt goes perfectly into the track and keeps your tonneau cover from shifting or lifting. You can trust it to do its job without any fuss.
Installation is strightforward. You start by undoing the star knob. Then you take off the lock washer, the large flat washer, and one of the rubber washers. Set those parts aside. You will notice there is still a rubber washer left on the elevator bolt. That washer goes down through the top of the cover.
Tonneau Cover Clams Universal Replacement Parts for Hard Folding or Soft Folding for Truck Bed, Rear Clamp Replacement (4 PCS)
The Tonneau Cover Clams Universal Replacement Parts for Hard Folding or Soft Folding for Truck Bed, Rear Clamp Replacement (4 PCS) is a straightforward solution for a common problem. If you own a truck and your tonneau cover clamps are broken, worn out, or just not holding like they used to, this set is designed to get you back on track.
Compatibility is the first thing to check. These clamps work with a wide range of trucks. They fit the Sierra 1500, 2500, and 3500 models.
They also work with the Dodge Dakota and Ram 1500, 2500, and 3500. Ford F150 and F250 owners are covered, as are those with a Raider, Titan, Tundra, Tacoma, or Gladiator. This set is built to work with most hard folding covers like rigid quad-fold and rigid tri-fold types. It also works with soft folding covers, including soft quad-fold and soft tri-fold designs.
If you are not sure, it is a good idea to measure your existing clamp to confirm the fit.
The materials used here are practical and meant to last. The body of the clamp is made from a durable plastic. It is waterproof, light weight, and won’t rust or corrode easily. The metal parts are made from 304 stainless steel. This gives you high corrosion resistance and makes them simple to clean. The steel is also fire and heat resistant, so it holds its strength even in high temperatures.
356A0014 Lock Knob Compatible with BAKFlip MX4 G2 Bed Cover Parts, Tonneau Cover Lock Replacement Parts for BAKFlip, 2 Pack
The 356A0014 Lock Knob Compatible with BAKFlip MX4 G2 Bed Cover Parts is a simple, direct replacement part for your tonneau cover. If your BakFlip cover’s prop rod support lock has worn out or broken, this two-pack gets you back in business. It’s not a flashy upgrade. It’s just the right part to fix a common issue. These lock knobs are designed to fit a wide range of BakFlip covers. Compatibility includes the MX4, F1, G2, HD, FiberMax, VP, Endura, CS, and CS-F1 models.
You don’t need to guess if they will work. The part number is 356A0014, so double-check your current part to be sure. They are meant as a direct swap, so installation is straightforward. The main job of these parts is to hold your cover open. They nestle inside the tonneau cover and grab the prop rod. This keeps the cover locked up against your truck’s rear window. Without them, the cover could fall down while you are loading cargo. That is a pain.
These little locks also keep the cover secure when it is closed. They are a small part, but they do a big job. The materials are practical. They use sturdy plastic and high-quality steel. The steel gives them strength and resists rust. The plastic is tough enough to handle daily use. You won’t need to worry about them snapping in cold weather or corroding from rain. They are built to last, just like the rest of your BakFlip system. What you get in the package is simple.
Rough Country Hard Flip Up Truck Bed Tonneau Cover for Dodge Ram 1500 (2009-2018) & 2500 (2010-2025) – Aluminum Tri-Fold Bed Cover, Fits 6'4 (76.3") Bed
The Rough Country Hard Flip Up Truck Bed Tonneau Cover for Dodge Ram 1500 (2009-2018) & 2500 (2010-2025) is a solid choice if you need a secure, durable cover for your 6’4” (76.3”) bed. This is an aluminum tri-fold design that focuses on simplicity and toughness. It’s built to fit Ram models from 2009 through 2025, so it covers a lot of years.
You get a sleek, low profile look with this cover.
The matte black aluminum panels and frame are corrosion-resistant, so they hold up against weather and road grime. It sits flush against the bed rails, giving your truck a clean, finished appearance. The tri-fold design means you can flip it open in sections, which makes getting to your cargo quick and easy without removing the whole cover.
Accessing your gear is straightforward. Two quick-connect prop rods hold the cover fully upright when you need complete bed access.
If you only need partial space, nylon straps let you secure it at the two-thirds open position. You can drive with the cover fully open, two-thirds open, or closed—no issues at highway speeds. The auto-latching system is a nice touch. When you close the cover, it locks itself into place. To open it, you just squeeze the latches, and it releases with one hand. No fumbling around.
Installation is designed to be painless.
Rough Country Hard Roll-Up Tonneau Cover for Ford F-250 & F-350 SuperDuty (2017-2026) – Aluminum Truck Bed Cover, Fits 6'10 Bed
The Rough Country Hard Roll-Up Tonneau Cover for Ford F-250 & F-350 SuperDuty (2017-2026) is built to keep your truck bed protected while giving you fast access to your gear. If you have a 6’10” bed, this aluminum cover fits flush and adds a clean, matte black look that matches your truck’s style.
You get real security with this cover. The aluminum slats and powder-coated frame resist rust and corosion, so it hold up against weather and road salt.
It can support up to 600 pounds of evenly distributed weight, meaning you can load gear on top without worrying. The built-in drain tubes channel water away, so your cargo stays dry even in heavy rain. That flush-fit design also helps keep prying eyes from seeing what is in your bed.
When you need your tools or gear fast, just pull the quick-release cable to unlock the cover.
It rolls up toward the cab smoothly, and the auto-latching system clicks it securely back in place when you roll it down. No fumbling with straps or locks. Nylon safety straps with quick-release clips hold the cover firmly when its open, so it wont shift or flap while you drive.
Installation is straight forward. You dont need any tools or drilling. Everything you need comes in the box—just mount it, roll it, and your ready to hit the road or trail.
Rough Country Soft Tri-Fold Tonneau Cover for Ford F-150 (2015-2020) – Fits 6'7 Bed, Weather-Resistant Truck Bed Cover, F150 Accessories
The Rough Country Soft Tri-Fold Tonneau Cover for Ford F-150 (2015-2020) is built for truck owners who need real protection for their gear. If you have a 6’7 bed, this cover is designed to fit that specific space. It focuses on keeping your cargo safe while giving you quick access when you need it.
This cover uses marine-grade vinyl, which is the same tough material found on boats. It stands up to rain, dust, snow, and road debris during daily driving or off-road trips.
Integrated perimeter seals help block out the elements, so your tools, camping gear, or work supplies stay dry and clean. You don’t have to worry about weather ruining your load.
Accessing your bed is simple because of the tri-fold design. You can drive with it fully closed, flip it two-thirds open for longer items, or fold it all the way open for full bed access. The cantilever latches lock it down tight, so nothing shifts or bounces loose while you’re driving.
It feels secure even on bumpy trails.
The cover sits low on the bed rails for a clean, factory-style look. It doesn’t stick up awkwardly or mess with the truck’s profile. All-weather seals run along the edges to help keep out moisture and dust, but it’s not totally waterproof. Some water might get in during heavy rain, so keep that in mind for sensitive items.
Construction uses a corrosion-resistant, black powder-coated 6061 aluminum frame.
Rough Country Hard Tri-Fold Tonneau Cover for Ford F-150 (2015-2020) – Aluminum Flip-Up Bed Cover, Fits 5'7 (67.1") Short Bed
The Rough Country Hard Tri-Fold Tonneau Cover for Ford F-150 (2015-2020) is a straightforward upgrade for your truck’s short 5’7” bed. It gives you a clean, flush look that sits low and tight against the truck body. The matte black aluminum panels and frame are built to resist corrosion, so it holds up well against weather and daily use. You get a tri-fold design that lets you access your cargo fast without removing the whole cover.
Getting to your gear is simple.
Quick-connect prop rods hold the cover fully open when you need the whole bed. If you only need partial access, nylon straps let you keep it open at two-thirds. You can drive with it fully open, partially open, or closed—whatever works for your load. The auto-latching system is a nice touch. It secures the cover when you close it, and the squeeze latches let you release it with one hand.
No fussing around with complicated locks or straps.
Installation is something you can handle in your driveway. The track and rail mounting system includes drain tubes to keep water out, and you won’t need to drill any holes. All the tools come in the box, so you can put it on or take it off without extra hassle.
Rough Country Tonneau Cover Parts Buying Guide
Finding rough country tonneau cover parts requires knowing your specific model and replacement needs. Maybe you backed into a tree branch and cracked a hinge. Or perhaps your cover’s weather seal gave out after a few harsh winters. Either way, you don’t want to buy a whole new system when a simple part will fix it. These covers are built tough, but things wear down over time. Let’s sort through the most common components you might need.
Rail and Clamp Kits
The side rails and clamps hold everything together. If your cover shifts around at highway speeds, check these first. Rails can bend if you accidently overload them. Clamp screws strip out too. Look for replacement kits that match your bed size exactly. Most covers use a C-channel rail design, but double-check yours. A loose fit means you’ll get flapping and noise on the road. Nobody wants that.
Hinges and Cross Bars
Hinges take a beating every time you fold the cover up. They can get stiff or break. Cross bars give the cover its structure. If yours is sagging in the middle, a cross bar is likely bent. These are straightforward to swap out. Just remove the old one and bolt in the new. You might need a friend to help hold the cover up while you work.
Weather Seals and Stripping
Water leaks are the biggest annoyance. The rubber seals along the sides and tailgate dry out and crack. Measure the old seal before ordering. Some are adhesive-backed, others slide into a channel. Pick the right one so you dont have to force it. A good seal keeps your gear dry and prevents rust from forming inside the bed.
Latch and Lock Mechanisms
If your cover won’t stay latched or the lock feels sticky, the mechanism is likely worn. Dirt and grit jam these up over time. Replacement latches are cheap and easy to install. Test the new one before you tighten everything down. Make sure it catches smoothly. A broken latch on a highway is a disaster waiting to happen.
Frequently Asked Questions About Rough Country Tonneau Cover Parts
What parts are included with a Rough Country tonneau cover?
Most Rough Country tonneau covers come with rails, clamps, crossbars, and the cover fabric. You also get weather seals, hardware, and an installation manual. The exact parts vary by model, so check your product page for details.
Can I buy replacement parts separately?
Yes, you can. Rough Country sells individual parts like rails, hinges, and clamps. If you break a part or lose hardware, contact their support team. They can help you find the right replacement.
How do I know if a part is compatible with my truck?
Check your truck bed size and model year. Most Rough Country covers fit specific trucks, like Ford F-150 or Chevy Silverado. Look for the part number on your current cover. Then match it with the new part on the website. If your unsure, call customer support.
Are the weather seals replaceable?
Yes, they are. Rough Country offers replacement weather seals for their covers. Over time, seals can wear out from sun or rain. Replacing them keeps your bed dry and prevents leaks.
What should I do if I lose the installation hardware?
Dont worry. You can order a hardware kit from Rough Country. It includes bolts, nuts, and clamps. Make sure you get the right kit for your cover model.
How long does shipping take for parts?
Shipping times vary. Most parts ship within a few days. Rough Country’s website gives you a delivery estimate at checkout. If you need a part fast, ask about expedited shipping.
Can I install new parts myself?
Yes, you can. Many parts are easy to swap. Just follow the instructions in your manual. Some parts, like rails or hinges, might need basic tools. If you get stuck, watch a video guide online.
What if my cover is out of warranty?
You can still buy parts. Rough Country sells parts for older covers too. Just confirm the part fits your specific model before ordering.
Quick Recap
Getting your Rough Country cover back in top shape is easier than you think. You don’t need to hunt for hours or guess which parts will work. Just check your model, pick teh parts you need, and you are done. The rails, clamps, and seals all fit like they should. No fuss, no returns, no second guessing. You can have your truck looking clean and working right in no time.
Now you have a clear path to fix or replace your rough country tonneau cover parts. Everything ships out fast so you can get back on the road. Just grab the parts that match your cover and get it done this weekend. Your truck will thank you.